3.2M SSMS Nonwoven Machine(Spunbonded/Spunmelt/Spunmelt/Spunbonded)


I、Usage
(1)Medical and health usage:operation suit、garment、face mask、diaper、sanitary napkin、disposable hygiene product etc;
(2)Home decoration:shopping bag、wall covering fabric、table cloth、bed sheet、bedspread etc;
(3)Lining for clothes or shoes:lining、adhesive interlining、shoe lining etc;
(4)Agricultural usage:Protection cover、nursery cover etc;
II、Sketch
The characteristics of the 3.2m SSMS produced by Huiyu company is :
Use equipment from well-known professional manufacture and combined with Huiyu producing technology ,forming advanced, reliable and stable SMMS production line .
Huiyu SSMS machine choose the key equipments from the following companies:
Jinhu/Jwell---------------------Screw extruder
Siemens Beide-----------------Motor
Siemens----------------------------------- frequency converter
Siemens-------------------------------PLC
Temperature control --------------------temperature control mould
Melt Roots Blower---------------------GD,USA
Melt spinning beam -------------------------Enka, Germany
Melt spinning box ------------------Enka, Germany
Low voltage components-----------Schneider
Guangyu S roller 600 meter-----------------------------High-speed calendar
Guangyu 600 meter------------------------------High-speed lap winder
Guangyu 1200 meter------------------------------High-speed slitter
With equipments from famous manufacturers in China and abroad, combined with mature technology from Huiyu. Our SSS, SMS, SMMS machines are quite advanced, stable and reliable.
III、Main technique parameter:
1.PP chips requirements
1.1Melt index: 35-45g/10min,fluctuation range of each batch≤1%。
1.2 Melt point:166℃
1.3 Ash: <0.15-0.25%
1.4 PP color master batch and additive
2. Melt PP chips requirements
2.1 Melt index: 1200-1800g/10min,fluctuation range of each batch≤1%。
2.2 Melt point:166℃
2.3.Ash: <0.15-0.25%
2.4. PP color master batch and additive
3.Products Width:3200mm
4. Spunbond Filament denier:1.8-2.3denier
5.Meltblown Filament denier:2-5um
6.Output: about 8000Ton/8000 hours ( based on 45GSM)
7.Weight range:15-70g/m2
8.Maximum diameter of fabric per roll:1500mm
9.Design speed:<=450m/min
10.Running speed:<=400m/min
IV、Labor arrangement
10 workers two shift per day
Carry workers :3 persons
Salesman: 3-5 persons
Technical engineer: 2 persons
V、Workplace:
Size of machine:L*W=45m*24m(including air blower room);
L*W=45m*15m(without air blower room)
Fore-spinning equipment size:L*W*H=30m*12m*11m
Back spinning equipment size:L*W*H=35m*8m*4.5m
Suggested workplace size:70m*25m(including material and final product warehouse)
Height of workplace:Fore-spinning 12m,Back spinning 5.5m
VI、Public Project
Install capacity of the whole production line: about 1800KW,actual power:1350KW,main voltage:3*380V,50Hz Cycling water:80m3/H(25°С,0.2-0.35mpa),water supply ability:5-10m3/H
VII、Approval standard for equipments
SSMS FABRIC
Items
|
g/m2
Specification
|
15
|
30
|
45
|
Allowable deviation(%)
|
First class
|
±8
|
Final product
|
±10
|
Width deviation(%)
|
First class
|
+2.0,-1.0
|
Final product
|
+2.5,-1.5
|
Fracture Strength
|
Longitudinal Strength
N≥
|
First class
|
15
|
35
|
50
|
Final product
|
12
|
30
|
45
|
transverse strength N≥
|
First class
|
10
|
28
|
44
|
Final product
|
8
|
25
|
38
|
SSMS FABRIC
g/m2
|
17
|
30
|
60
|
Average weight deviation % ≤
|
8
|
8
|
8
|
Average area quality deviation(coefficient of variation)
|
5-8%
|
5-8%
|
5-8%
|
Hydrostatic pressure
|
>110
|
>200
|
>300
|
VIII、Machinery quality index, parameter and technical specification
☆Rim charge auxiliary screw and recycling unit
Usage: recycle the rim
Recycling screw use the alternating frequency converter
Screw diameter: φ105
Screw heating zone number:4 zones
☆170 model screw extruder
1、Usage
The main usage of this device is to mix PP, and additives as color master batch, antioxidant, fire retardant with certain ratio
2、Main technical parameter
Screw size : Φ170*3, Maximum feeding ability: 630kg/h×3
Speed: 75r/min
Heating zone:6 zones
AC motor
Set up high level and low level alarm device, auto control feeding device. Electrical motor of screw in mixing device is frequency converting.
☆Screw spinning machine
Usage
The PP fusant go through filter, fusant pipe,and metering pump transport the fusant into spinning container and fiber comes out from spinneret.
Main technical parameter
2.1 Output:about :8500t/year
Fiber denier:1.8-2.3denier
Weight range: 15-70g/㎡
2.2 Vertical filter
Filter ratings:250μm
Filter weber diameter: 172mm
2.3 Metering pump and transmission unit
Pump offering quantity:300CC×3
Frequency converter control synchronous machine, made in China
2.4 Spinning container
Heating pattern:Electrical heating
2.5 Fusant pipe
Heating pattern: Electrical heating
2.6 Monomer suction device
Air pressure:1300Pa
Flux: 844m3/h
2.7 Spinning component
Hole diameter:0.45mm
L/D:1:5
Material:SUS431
☆Stretching device( NEW MODEL )
Usage: stretching and cooling the fiber.
Main technical parameter:
Working width:3200mm Device components
The device contains side blower chamber, up stretching channel, down stretching channel ,diffuse winder tunnel etc. Using double-side symmetry wind to cool fiber,
Stretching slit in up and down stretching device can be adjusted according to process requirements. Adjust system takes torque motor drive.
The new type of upper and lower stretcher changes the characteristics of the traditional upper stretcher which cannot be adjusted, making the equipment more regulated to the air volume and the width of the narrow seam, and ensuring the higher requirements of the customers. The height of the stretcher is lengthened, so that the non-woven fiber can be finer and the non-woven fabric is more even and the tension is stronger.
☆Web forming machine(new model)
Usage
Offer carrier for fiber after stretching.
Main technical parameter
Air suction quantity: 58,000m3/h
Design speed: <= 450m/min
Normal running speed: <=420 m/min
Web-laying apron: venting quality: 7,000~12,000m3/h.m2
3. Device components
3.1 web-laying apron transmission device
3.2 Air suction channel
3.3 Sealing device
3.4 Position correcting set
3.5 Tension device
3.6 Rack device
3.7 motor drive roller
☆ Melt Device Parameter and technology
Screw extruder
Model : Jwell JW130 1sets
Model : USA Roots blower GD 1 sets
Motor and Noise filter use famous brand in foreign and mainland, frequency speed adjusting
Siemens beide frequency control
Chip filter : AJ zhengzhou 1sets
Plug-in tyle
Melt measurement system: self made 1sets
Metering pump huaxi 150CC
Frequency control motor
Air compression heating system
stainless material heating power:550kw 1 sets
Melt tank system : Germany Enka
Effective width : 3200mm
Capacity :125kg/h heating power :75kw ( include 4 spinnerets )
Material : SUS431
Cloth forming receiver : suction blower, frequency control motor speed .
Self made 1 set
X. Public part on Spunbond and Meltblown
☆ metering mix device
1. Usage
The main usage of this device is to mix PP, and additives as color master batch, antioxidant, fire retardant with certain ratio
2、Main technical parameter
2.1 Maximum feeding ability: 650㎏/h×4
2.2 Surge bin capacity: 5*1.5m3
2.3 Maximum additive hopper:3
3、Facilities and specification
3.1 Surge bin 4 sets
Effective capacity:1.5 m3.Main material: stainless steel. Set up a low level alarm device.
3.2 Measuring and mixing device 4 sets
It is made up of 1 main hopper ,2 accessory hoppers ,vacuum feeder , metal detector and so on. Set up high level and low level alarm device, auto control feeding device. Electrical motor of screw in mixing device is frequency converting.
☆Calender
Main parameter
Speed: <=600m/min
Working width:3200mm
Roller type: Up roller is embossing roller, down roller is mirror roller.
☆Lap winder
Main parameter
Speed: <=600m/min
Working width:3200mm
Paper tube diameter: Φ150mm
Maximum winding diameter:1500mm
☆Slitter
Main parameter
Speed: ≦1200m/min
Working width:3200mm
Minimum dividing width:120mm
Maximum fabric diameter: Φ1200mm
☆Electrical Control System
Main motor is Siemens Beide; Controlled by Siemens PLC and frequency converter.; Low voltage components: Schneider.
Hubei Huiyu Machinery CO.,LTD.